Ily SATA Blu-ray/DVD/CD Duplicator Controller Manual de usuario

SATA Blu-ray/DVD/CDDuplicator Controller User’sManual Version1.0

5. Verify – This command verified readability on the master disc and/or all target discs. This command is especially useful for audio CD duplication

7. Set Burn Speed – This feature allows you to set the burn speed of various types of disc: CDs (data and VCDs), audio CDs, DVDs, dual-layer DVDs (

or to select drive Press ENT to finish Setting 9. Track Edit – This command allows users to select tracks from multiple audio CDs and burn to t

c. Once the copy process is completed, the LCD screen will display the total number of tracks on target CD(s), total time used and total time remained

6.) Drive Info: Checks the make, model, firmware and the channel (port) of the drive(s) that are connected to the duplicator controller. Press ENT Pre

11. Setup – This command contains options to configure the duplicator system. 1.) Start-up Menu: Sets the command to be displayed first when the machi

14 7.) Compare Speed: Sets the speed at which the master disc is compared with the copies disc(s). The speeds for CD are: 1, 2, 4, 8, 10, 12, 16, 20,

15 11.) Advance Setup: Functions for advanced users. (1) Power On Time: Set the amount of time the duplicator controller counts down before initializ

Allows the copying of the CD-TEXT on the (5) Copy CD-TEXT: master disc(s) to the target disc(s).Press ENTor to select mode and press ENT to confirm

Note: The Source Disc may be placed in the Reader Drive or any of the Writer Drives. 3.) Image Info: Shows the image number in sequential order, th

TIntroduction 1 11.Setup 13 12.HDD Manager 16 Operating Environment 1 o Start-up Menu13o Select Image 16LCD Front Panel Overview 1 o Auto Start13

6.) HDD Info: Shows the amount of used and free images available on the HDD in both CD and DVD formats.Press ENT7.) Format HDD: Deletes and formats al

(b) Synchronous: Loads the image at the same time while the duplicator is making copies from the master disc to the blank discs. As the copies being m

Basic Troubleshooting: Follow these simple steps for quick and proper troubleshooting. 1. Power does not turn on or unit receives no power. a. C

Introduction: Thank you for purchasing a SATA CD/DVD/Blu-ray Duplicator Controller. This controller is specifically engineered to run a stand-alone C

Hardware Installation Guide: Connect drives with cables provided to the appropriate slot on controller as indicated below.

Configuration Guidelines:Next are the basic operation guidelines on how to set SATA devices including optical reader, writers, and/or hard drive. The

9 TRACK EDIT Allows for the selection of individual track(s) from different master audio CDs to create custom compilation. 9.1 Copy Track Allows the

11.7 Compare Speed Sets the speed at which the compare process is executed. 11.8 Skip Read Error Enables the option to halt the duplication process

Functions: 1. Copy – This command will copy the master disc placed in the designated Source Drive to all target discs in the Writer Drives. This pro

To start the Copy & Verify process: 1. Power on the machine (if not already on). 2. Eject disc tray of the Source Drive and place the master d